Overview
BOGEN IKS9
INCREMENTAL MAGNETIC SENSING HEAD
Measuring movements with the IKS9 - more power in less space
The incremental magnetic sensing head IKS9 for linear and rotary applications:
The IKS9 impresses customers in automation, instrumentation and motion control applications with an extremely high accuracy and a particular high degree of modularity. BOGEN offers more than 1 million different variants of IKS9 that can be configured to customer-specific requirements.. In combination with an individual scale, measurement solutions for almost every application can be custom-tailored.
- High accuracy
- Resolution options available to 20nm
- Programmable resolutions
- Customizable max output frequencies
- Software programmable interface
- Connector options with multiple cable lengths
- No wear from usage
- Resistant to dust, cooling lubricant emulsion, oil, etc
- High fly height tolerance
- Unlimited measuring length
|
Part Numbering
READHEAD PART NUMBERING
SCALE PART NUMBERING
Features
IKS9 FEATURES
| Resolution, Output frequency F= 1750 kHz |
0.5μm, 1.0μm |
| Max. Movement Speed |
7m/s - 1.0μm
3.5m/s - 0.5μm |
| Energy consumption (without Load) |
<65 mA (UB = 5V) |
| Operating Temperature |
-20 to +70°C |
| Storage Temperature |
-20 to +80°C |
| Protection class |
IP67 (green LED = set up ok) |
| LED |
Green LED = Set up on RED LED* |
*Error codes refer to the table below
| LED flashing signs amount |
Description |
| 1 |
Magnetic field is too high |
| 2 |
Magnetic field if too low |
| 3 |
The range of the magnetic fluctuation is too large |
| 4 |
Output frequency is too high |
| 5 |
Movement speed is too high |
| 6 |
Movement speed is much too high (latched) |
| 7,8 |
Movement speed too high for internal signal processing with current programming (latched) |
| 9, 10, 11 |
Internal Error 9, 10, 11 (latched) |
SENSING HEAD VARIANTS
| Pole pitch |
2mm |
| Supply voltage |
5 V ± 5 % |
| Interface (without load) |
RS422 (0 to 5V) |
| Cable length of sensing head |
Standard 2m, optional variable length from 10cm up to 6m |
| Connector |
D-sub 9 pin (male) |
Output Circuit
BOGEN IKS9 OUTPUT CIRCUIT
Dimensions
BOGEN IKS9 DIMENSIONS
Pin Assignment
BOGEN IKS9 PIN ASSIGNMENT
Data Sheet Magnetic Tape
BOGEN IKS9 DATA SHEET MAGNETIC TAPE
| Accuracy class (20°C) |
±10μm |
| Material |
Magnetic tape: nitrile magnet
Carrier tape: stainless steel |
| Width |
10mm |
| Thickness |
Others on request incl. stainless steel carrier |
| Magn. pole pitch |
2mm |
| Operating temperature |
-40°C... + 100°C max. |
| Linear exp. coefficient |
-17 x 10-6/K |
| Bending radius |
65mm min. |
| Max. length of roll |
25m, 50m, others on request |
| Material |
Double coated acrylic adh. tape, pre assembled |
| Width |
9mm |
| Thickness |
0.13mm |
| Reel length |
55m max. |
Downloads
Download BOGEN Catalog here.
